The automatic welding process of automatic welding robots

The automatic welding process of an automatic welding robot 1. Generate programming. Technicians need to perform certain programming tasks. Technicians program based on the workpiece, input it into the control system of the automatic welding robot, and end the welding action through teaching and playback. Before starting the machine, it is necessary to check the dust and oil impurities around the equipment and clean them up in a timely manner to prevent environmental factors from affecting the welding quality during the welding process. 3. The automatic welding robot completes the welding operation based on teaching and playback. The automatic welding robot selects appropriate welding parameters based on the workpiece, and the matching welding parameters can ensure the stability of the welding. The welding parameters are selected, and the automatic welding robot confirms the orientation of the weld seam through the weld seam positioning function. The control system issues instructions, and the executing mechanism lowers suitable welding materials to fill the weld seam, The cooled weld seam is beautiful and sturdy. 4. The automatic welding robot will also be equipped with corresponding auxiliary equipment. The welding positioner advances the welding accuracy by dragging and rotating the workpiece. The gun cleaner can clean the welding gun and shorten the remaining welding wire. The automation level is high in the welding process, and personnel intervention is not required. 5. After the automatic welding robot completes welding, it is necessary to check the quality of the weld seam. The quality of the weld seam can be inspected with the naked eye or machine equipment for flaw detection. The weld seam quality of the automatic welding robot has a high qualification rate, which cannot be compared with traditional welding. 6. After completing the operation, the automatic welding robot will be interrupted for daily protection and maintenance.