Precision welding steps of welding robots

Step 1 of precision welding for welding robots: When performing precision welding, it is necessary to adjust the electrode rod to the corresponding position so that the motor can just contact the weldment, and the welding robot is also the same. In addition, it is also necessary to maintain balance between the electrode arms to achieve good welding quality. 2. Mainly based on the thickness and material of the weldment, the power indicator light will light up when the welding robot is powered on. The main method to set a reasonable electrode pressure is to adjust the spring pressure nut to change the compression stroke. 3. After the adjustment operation is completed, the welding robot can officially start the welding operation after the power, water source, etc. are turned on. By placing the weldment between two electrodes, the robot will automatically make the upper electrode come into contact with the weldment and pressurize it, and the transformer will start working to heat the weldment. 4. After precision welding by the welding robot, the electrode of the welding robot rises to generate tension on the spring, cutting off the power supply and returning to the original state, and this welding process ends.